FRP Cooling Towers are manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. It is a mechanical type Counter Flow Tower. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The wet cooling Towers are cooled with the help of evaporating some proportionate quantity of cirulating water.

The bottle type tower casing is filled with Honeycomb type PVC FILLS. The rotating water distributor sprinkler is fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the Honeycomb Fill media. The sprinkler will be operated with self-propulsion system. The PVC Fills is corrugated with channels between each flutes to prevent the blockage and giving more and large surface area per unit volume. The cold air meets the cold water at the bottom of the infill providing maximum evaporation and heat transfer in the infill.

Finally FRP Cooling Towers are more compact, light in weight, least power consumption, long-lasting, Durable and lowest maintenance expenditure. Since Hot dip galvanized structural and stainless steel fasteners are used, FRP Towers are corrosion Free.

FRP tank

We use fiberglass high tension property , multi-layer, multi-angle to wind the dome. FRP storage tanks can store, transport organic and inorganic solvent, chemical and electrochemical corrosive materials. It can meet the requirement of the transfer, transportation of non-electrolyte fluid. It can remove the static. It resists many kinds of acid , alkli , salt and organic solvent.

Product Characteristics

Excellent mechanical and physical properties.
Corrosion resistance and long life.
Agility in design , good structure in tank wall.
Long life , low cost for maintenance.
Product Type
Within the range of the normal pressure minus 0.05Mpa, filament product has a diameter of 50-4000mm, length of 2000-12000mm. The cubage is 1-120m3. We can also produce according to customers requirement .  

FRP tank is divided into vertical and horizontal mechanical winding FRP storage tank、transport tank,reaction tank,all kinds of chemical equipment,FRP vertical tank,horizontal storage tank,transport tank,vessel and large series vessels select epoxy furan resin、modified or polyester resin,phenolic resin as the adhesive,consisted of rich resin content inner liner,impervious layer,filament wound reinforced layer and surface protection layer.
Class:Vertical tank,horizontal tank，transport tank,reaction tank,large vessel

Characteristics:
Pressurization,anticorrosion,ageing resistance,long service life,light weight,high strength,anti seepage,heat resistance,insulation,non-toxicity,smooth surface